High speed HDMI 1.4E interconnect with Ethernet was designed for error free HD 1080p and Ultra HD (4K) video transmission in extended lengths of up to 20 m and even longer without any signal amplifier or repeater requirement. Extremely high total TMDS throughput (more than 12Gb/s) and low losses ensure a full HD 1080p signal is precisely transmitted without single pixel error or noticeable masking issues! With a rated 100 Ohm wave impedance it is based around 5 pairs of solid 0.258 mm² BRC conductors and 7 service multi-stranded BRC conductors. Each conductor pair is individually shielded by copper foiled PET with integral multi-stranded BRC drain wire and then all pairs are bound together by PET tape. The extremely high EMI immunity is achieved by a common double shield.
Specifications
| Type: | high speed HDMI 1.4E interconnect cable with Ethernet |
| Wave impedance: | 100 Ohm |
| Conductor: | 5 pairs of solid 0.258 mm² BRC conductors and 7 service multi-stranded BRC conductors |
| Insulation: | 3-layer CAFPE® |
| Shield: | Each conductor pair is individually shielded by copper foiled PET with integral multi-stranded BRC drain wire. Common sgield: inner layer - copper foiled PET, outer layer - >80% BRC braid |
| Jacket: | antistatic low-loss SPVC |
| Protective cover: | nylon protective sleeve |
| Outer diameter: | 11,3 mm |
| Available: | in standard terminated lengths |
| Country of origin: | China |
Due to the cable construction complexity and excessive material consumption the initial burn-in period (time during which the best sonic performance is reached) is suggested as 100 hours of uninterrupted music playback at least. We highly recommend playing music of different genres.
Due to our policy of continuous product development, all specifications are subject to change without notice.