It was purposely developed for immaculate matching of the hungriest of speaker loads and suitable solid-state amplifiers with low output impedance and high peak output current. DSC enables instantaneous group wave speed, low and stable impedance from DC (0Hz) to tens of MHz’s and significant EMI reduction up to 20-40dB if compared to a conventional twisted conductor arrangement. X-Shield® rejects most of emitted interferences throughout the entire frequency spectrum. High-damping jacketing with TPU Elastollan® exemplifies unmatched mechanical strength and vibration absorption. With the ability to reproduce the fastest and most complex dynamic contrasts Reference DSC SC opens the new horizons of musical fidelity and holographic soundstaging.
Specifications
Type: | High End shielded speaker cable |
Distributed Symmetrical Conductor (DSC): | two 4.50 mm2 transmission lines, each comprised of three similar 1.50 mm2 (28 х 0.26 mm) BRC conductors, configured around a central damping cord in a hexagonal structure 3+3+1 with a maximum packing factor |
Insulation: | SATI® with PTFE tapes |
Conductor damping: | central elastic SPVC & extra radial cotton cords |
Dielectric binding: | SASDB® with PTFE tapes |
Shield: | X-Shield® SE with an integral drain wire |
Jacket: | thermoplastic polyurethane (TPU) Elastollan® |
Protective cover: | nylon sleeve |
Outer diameter: | 19 mm |
Termination: | different variants with Reference V2 Banana or Spade connectors |
Available: | in standard terminated lengths |
Country of origin: | made in Russia |
Due to the cable construction complexity and excessive material consumption the initial burn-in period (time during which the best sonic performance is reached) is suggested as 100 hours of uninterrupted music playback at least. We highly recommend playing music of different genres.
Due to our policy of continuous product development, all specifications are subject to change without notice.
Available Terminated Lengths
2 × 1.65 m
2 × 2.65 m
2 × 3.10 m
2 × 4.35 m
2 × 5.00 m