Our basic coaxial interconnect is objectively engineered for applications, where efficient external interference protection is a key requirement.

The reinforced shield with the inner layer executed of 25 µ rolled copper foil and a >90% BRC braid for the outer layer ensures superior EMI suppression. With regards to vibration damping, a critical influence on performance, we used thermoplastic polyurethane (TPU) Elastollan® for jacketing. Developed by BASF, it provides exceptional dielectric long-term stability, mechanical strength and efficient absorption of acoustic noise and vibrations. Highly ergonomic Special V2 RCA plugs with the centre pins made of high purity copper make the connection a breeze even with the flush-mounted sockets. Being recommended not only for Home Audio & Multimedia, but for professional use as well, it performs with meticulous attention to the last fine detail, precise tonal balance and sense of timing.


Type: analog coaxial interconnect cable
Conductor: 0.70 mm² (19 x 0.23 mm) multi-stranded BRC conductor
Wave impedance: 75 Ohm
Insulation: 3-layer CAFPE®
Shield: inner layer - 25 µ rolled copper foil, outer layer - >90% BRC braid
Jacket: thermoplastic polyurethane (TPU) Elastollan®
Outer diameter: 8,5 mm
Termination: RCA/RCA with Special V2 plug
Available: on spools and in standard RCA terminated lengths
Country of origin: made in Russia

Due to the cable construction complexity and excessive material consumption the initial burn-in period (time during which the best sonic performance is reached) is suggested as 100 hours of uninterrupted music playback at least. We highly recommend playing music of different genres.

Due to our policy of continuous product development, all specifications are subject to change without notice.

Available Terminated Lengths

2 × 0.62 m
2 × 1.00 m
2 × 1.65 m
2 × 2.65 m
2 × 4.35 m
2 × 5.00 m